manualshive.com logo in svg

Newport 350B, Руководство пользователя

Поделиться
Скачать
Newport 350B Скачать руководство пользователя страница 60

 

Maintenance and Service 

 

59 

g.

 

If the operating set-point has not been set or needs to be changed, select the 
PRESET display mode and use the control knob to set the correct value. The 
operating temperature, resistance or TE current is set before turning the OUTPUT 
on. 

h.

 

The OUTPUT can now be turned on and the Model 350B Temperature Controller 
will automatically control the temperature or I

TE

. Push the OUTPUT switch once to 

turn the current on to the TE module and a second time to turn the current off. If 
there is an error condition the current will not turn on and the ERROR indicator 
LED will come on. If this occurs verify that the temperature sensor and TE 
connections are correct. After an ERROR condition has occurred the OUTPUT 
switch must be pushed once to reset the control circuitry. After the fault is corrected 
and the circuitry is reset the OUTPUT switch can be pushed a second time and the 
output current will turn on. 

i.

 

During the operation of the Model 350B Temperature Controller any of the 
parameters may be displayed and the status of the Model 350B Series Temperature 
Controller may be monitored. 

NOTE 

Newport Corporation is not in any way responsible for any damage to any device used in 

conjunction with the Model 350B. 

Содержание 350B



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды