manualshive.com logo in svg

Newport Electronics iServer MicroServer iTHX-2, Руководство оператора

Поделиться
Скачать
Newport Electronics iServer MicroServer iTHX-2 Скачать руководство пользователя страница 7

Award-winning Technology:  The iServer is simple to install and use. It features award-

winning technology that requires no special software except a Web Browser.

The iServer connects to an Ethernet Network with a standard RJ45 connector and sends

data in standard TCP/IP packets. It is easily configured with a simple menu using a Web

Browser and can be password protected.  From within an Ethernet LAN or over the

Internet, the user simply types its IP address or an easy to remember name such as

"Cleanroom 5" or "Midwest Server Room" in any Web Browser, and the iServer serves a

Web Page with the current readings.

Typical Applications:  The iServer is great for monitoring tempe humidity in

applications such as:  clean rooms, computer rooms, HVAC systems, pharmaceutical

and food processing and storage, hospitals, laboratories, semiconductor fabs, electronic

assembly, warehousing, museums, manufacturing, greenhouses, farm animal shelters,

and many more.

Email Alarms:  All iServer models that are on a LAN that is connected to the Internet can

trigger an alarm that can be sent by email to a single user or to a group distribution list,

including text messages to cell phones and PDA’s.

This device can be purchased as a stand alone DIN Rail mounted unit (iTHX-2) or,

as a bench/wall mount unit (iTHX-W), or as a bench/wall mount unit with an LCD

display, Flash Memory Card and Back-up Battery (iTHX-M). 

The following example illustrates how you can hookup an iServer to your network:

A standard web browser can be used to monitor and chart temperature, humidity, and

dew point. The browser can also be used to configure the device’s IP address,

passwords for access and overall configuration parameters. An iLD Big Display can

display temperature, humidity and dewpoint received from an iServer over the Ethernet

or the Internet.

The following example illustrates how you can hookup an iServer and iLD to your

network:

Figure 1.1 iServer with Probe on the Ethernet Network 

COMMUNICATIONS

ETHERNET

DC POWER IN

RESET

COL
ON
TX
RX

3

Downloaded from 

Elcodis.com

 

electronic components distributor

 

Содержание iServer MicroServer iTHX-2





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды