
13
Figure 1.11
2.3 Stove placement / clearance requirements
This stove must only be installed onto floors with an adequate load-bearing capacity. If an existing
construction does not meet this requirement, suitable measures (e.g., load distributing plate) must
be taken.
Must be in accordance with current National laws, Building Regulations, & any
Rules in Force, including BS 8303 and BS EN 15287-1:2007. Also refer to Approved
Document J (England & Wales)
Wooden floor protection.
See:
Figure 2 and 2A
The Rydal 5 SE stove can only be used with a
Constructional hearth
and
Superimposed hearth
and must be in
accordance with current National laws Building Regulations, & any Rules in
Force, including BS 8303 and BS EN 15287-1:2007. Also refer to Approved Document J
(England & Wales)
Data plate
Содержание Rydal 5 SE
