Newman Easedale 5 SE, Инструкция по установке и эксплуатации

Страница: 48 / 53

48
Troubleshooting the stove (Continued).
Problem Probable Cause Action
Poor quality wood being used Use dry seasoned hardwood.
Less than 20% moisture content)
Flue draught low Consult your stove installer
Refer to user instructions for correct
Excessive blackening of glass Air control use incorrect use of air controls
Operate the stove at a higher
temperature for a short period of time
Stove operated at a continuous whenever the stove is used.
low temperature Warning : Do not exceed the
maximum fuel load stated.
Refer to user instructions
Important:
Major causes of chimney fires are creosote and tar built up in the flue and stove. Consult an
approved chimney sweep if you are experiencing tar and creosote problems before continued use
of the stove.
Consult a qualified heating engineer if you experience continued flue problems and do not use the
stove until the problem is rectified.
3.5 Replacement parts
 Only use replacement parts recommended by the manufacturer.
 Modifications to this appliance must not be made.
3.6 Product End-of- Life / Recycling
To Dispose of the stove after the product life has expired, please observe the following
information:
Dispose of the items correctly i.e. separate the parts to be disposed of in material groups.
Always dispose of items in a way that is sustainable as possible and that is in line with the current
environmental protection, reprocessing / recycling and disposal technology.