manualshive.com logo in svg

NewLine LED 75, Руководство пользователя, Страница: 25 / 41

Поделиться
Скачать
NewLine LED 75 Скачать руководство пользователя страница 25

22

Step 6

: Use finger or pencil to click and hold the center of the flickering cross       . 

             Do not release until     moves to the next positioning point. Complete the 
             calibration process as instructed. 

To provide calibration samples, tap the crosshair each time that it 

appears on the screem.

Right-click anywhere on the screen to return to the last calibration 

point. Press the Esc button to close the tool. Do not change your 

screen orientation until you have completed the calibration process.

Step 7

: After the calibration is complete, the 

Digitizer Calibration Tool

 dialog box will be 

            displayed. Click 

Yes

 to save calibration data.

Step 8

: The 

Tablet PC Settings

 dialog box will be displayed again. Click 

OK

. The calibration 

             will be complete.

 

●

 To ensure writing accuracy, use the pencil or stylus included with the product for proper positioning. 

 ●  

Positioning errors may cause failure of touch functions of the display. In that case, please perform 

    positioning again. 

 

Tip:

Содержание LED 75










































Отзывы:

Нет отзывов