18
Installing the Internal PC (Optional)
The internal PC does not support hot plugging. Therefore, you must insert or remove it when the
screen is powered is off. Otherwise, the screen or internal PC may be damaged.
You will need to purchase the internal PC separately. Perform the following steps to install the
internal PC.
CAUTION
Step 1: Unscrew the M3 screws by
hand to remove the internal PC
shielding cover.
Step 2: Push the internal into the
internal PC port at the rear of
the screen from right to left.
Step 3: Secure the internal PC to the
display by using the M3 screws.
Step 4: Ensure the installation is
correct before turning the
power on again.
M3
M3