Newland NLS-HR1550-3E, Руководство пользователя

Страница: 28 / 178

**
【
Enter Setup
】
【
Exit Setup
】
18
Chapter 2 General Settings
Introduction
There are two ways to configure the HR15 cordless scanner: barcode programming and command programming.
Barcode Programming
The HR15 cordless scanner scans a series of barcodes to program features. In the following sections, we will explain the
available options and features and provide the barcodes to program them.
This programming method is most straightforward. However, it requires manually scanning barcodes. As a result, errors
are more likely to occur.
Command Programming
You can send the command strings through the Host to your scanner to perform configuration. In the following sections,
the commands will be provided along with programming barcodes.
This configuration can also be performed through our software. For more information, see the
“EzSet123 Scanner
Configuration Utility User Guide
”
.
Note: All settings except temporary ones are stored in non-volatile memory of the scanner and will not be lost
by removing power from the scanner, or turning off/ rebooting the device.