Newland NLS-HR1550-3E, Руководство пользователя

Страница: 21 / 178

11
Power on, Sleep, Power off, Reboot
Powering on the device
Hold down the trigger on the scanner for 1 second or longer.
Note: When using the scanner for the first time, the user MUST hold down the trigger for 10-15 seconds to exit battery
protection mode and activate the scanner. The scanner emits several beeps to indicate success.
Entering the sleep mode
If the scanner is in the Manual mode, when no operation is performed on the device for 5 seconds, the scanner will
automatically enter the sleep state.
Powering off the device
Scan the Power Off barcode. (see the
“Operating Mode Options”
section in Chapter 2)
Note: If the scanner is in the Manual mode, when no operation is performed on the device for a specific time period
(default: 5 minutes, programmable), the scanner will be automatically turned off. (To change the time period, see the
“
Power-off Timeout
”
section in Chapter 2).
Rebooting the device
If the HR15 stops responding to input or runs abnormally, press the Reset button on the scanner to reboot it.
Maintenance

The scan window should be kept clean.

Do not scratch the scan window of the device.

Use soft brush to remove the stain from the scan window.

Use the soft cloth to clean the window, such as eyeglass cleaning cloth.

Do not spray any liquid on the scan window.

Clean other parts of the device with water only.
Note: The warranty DOES NOT cover damages caused by inappropriate care and maintenance.