Newland NLS-HR1550-3E, Руководство пользователя

Страница: 78 / 178

**
【
Enter Setup
】
【
Exit Setup
】
68
Set Length Range for AIM 128
The scanner can be configured to only decode AIM 128 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Both lengths can range from 1 to 255 characters. If minimum length is set to be greater than maximum length, the
scanner only decodes AIM 128 barcodes with either the minimum or maximum length. If minimum length is same as
maximum length, only AIM 128 barcodes with that length are to be decoded. The default minimum and maximum
lengths are 1 character and 255 characters respectively.
【
Set the Maximum Length
】
【
Set the Minimum Length
】
Example: Set the scanner to decode AIM128 barcodes with lengths containing between 8 and 12 characters
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric
barcode “8”. (See the “
Digit Barcodes
” section in Chapter 7)
4. Scan the Save barcode. (
See the “
Save/Cancel Barcodes
” section in Chapter 7)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes
“1” and “2”.
7. Scan the Save barcode.
8. Scan the Exit Setup barcode.