Newland FR40 Koi Series, Руководство пользователя

Страница: 31 / 195

【
Enter Setup
】
31
**
【
Exit Setup
】
Beep Definitions
Beep Sequence Indication
4 ascending beeps
Power up (startup).
1 beep
A non-programming barcode was decoded (if the Decode Beep is enabled).
2 beeps
A programming barcode was decoded (if the Decode Beep is enabled).
3 short low beeps and 2 high beeps
The scanner failed to decode a barcode (if the Decode Beep is enabled).
1 long low beep
The scanner detected an unknown character when using USB HID-KBW (if
the Beep on Unknown Character is enabled).
Scan Mode

Manual Mode: A trigger pull activates a decode session. The decode session continues until the barcode is decoded
or you release the trigger.

Sense Mode: The scanner activates a decode session every time when it detects a change in ambient illumination.
The decode session continues until the barcode is decoded or the Decode Session Timeout occurs. Pressing the
trigger can also activate a decode session.

Continuous Mode: Pressing the trigger activates a decode session. The decode process continues until the
barcode is decoded. After finishing a decode session, the scanner automatically starts a new session until you press
the trigger a second time.
【
Manual Mode
】
【
Continuous Mode
】
**
【
Sense Mode
】