Newland FR40 Koi Series, Руководство пользователя

Страница: 162 / 195

【
Enter Setup
】
**
【
Exit Setup
】
162
Chapter 9 Batch Programming
Introduction
Batch programming enables users to integrate a batch of commands into a single batch barcode .
Listed below are batch programming rules:
1. Command format: C
“=” + Parameter Value.
2. Each command is terminated by semicolon. Note that there is no space between a command and its terminator
semicolon.
3. The last command must be the Save command (0000160).
4. Use the barcode generator software to generate a 2D batch barcode.
Example: Create a batch barcode for llumination Always On (0200030), Sense Mode (0302010), Decode Session
Timeout (0313000) = 2s, Disable the Discrete Lengths for Interleaved 2 of 5 (0405140):
1. Input the commands:
0200030; 0302010;0313000=2000; 0405140;0000160;
2. Generate a batch barcode.
When setting up a scanner with the above configuration, scan the Enable Batch Barcode barcode and then the batch
barcode generated.
【
Enable Batch Barcode
】