Newland FR40 Koi Series, Руководство пользователя

Страница: 163 / 195

【
Enter Setup
】
163
**
【
Exit Setup
】
Create a Batch Command
A batch command may contain a number of individual commands each of which is terminated by a semicolon. It must be
ended with the Save command.
Command Structure: Command
(+ “=” + Parameter Value)
4 command syntaxes are described as below:
1. Syntax 1: Command
This syntax applies to most configuration situations.
Example:
Set the Baud Rate to 38400bps: 0100060
Enable the Sense Mode: 0302010
2. Syntax 2: C
“=” + Decimal Digit(s)
This syntax applies to the options/features programming which requires the entry of parameter value (decimal), such
as the Maximum/Minimum Length, Decode Session Timeout, Timeout Between Decodes (Same Barcode) and
Sensitivity.
Example:
Set the Decode Session Timeout to 3000ms: 0313000=3000
Set the Sensitivity to (level) 10: 0312040=10
3. Syntax 3: C
“=” + Hexadecimal Digit(s) (e.g., 0x101a, 0x2C03)
This syntax applies to the features/options programming like the Custom Prefix/Suffix, Terminating Character Suffix,
Code ID Suffix, Set/Delete the Discrete Length and Program Extraction Option, which requires the entry of parameter
value (hexadecimal).
Example:
Decode Interleaved 2 of 5 barcodes containing between 4 and 26 characters: 0405160=0x041a
Set the Terminating Character Suffix to CR/LF: 0310000=0x0d0a
4. Syntax 4: C
“=” + Double Quotation Marks
For situations where the parameter value is visible character in Syntax 3, this syntax is also appropriate.
Example:
Set the Custom Prefix to AUTO-ID:
0300000=“AUTO-ID”