Newland FR40 Koi Series, Руководство пользователя

Страница: 160 / 195

【
Enter Setup
】
**
【
Exit Setup
】
160
When scanning a QR Code barcode, send the leftmost character through the 20th and the 113th
character through the 140th of the data:
1. Scan the Enter Setup barcode.
2. Scan the Enable Extraction barcode.
3. Scan the Program Extraction Option barcode.
4. Scan the numberic barcodes in the following table, the Save barcode and the Exit Setup barcode.
Digit 033 000 000001 000020 000 001013 001040
Meaning QR Code ID Left to Right
Start with
leftmost char
End with
20th char
Left to Right
Start with
113th char
End with
140th char
Data Extraction Section 1 Data Extraction Section 2
Note:
1. Up to 3 data extraction sections are allowed for one 2D extraction option.
2. Neither the start position nor end position can be greater than 9999.
3. Data extraction sections can be overlapped. For instance, section 1: 1st character through the 50th (Left to
Right); section 2: 2rd character through the 40th (Left to Right).
4. Start position can be greater than end position. In the example above, if data extraction section 1
is “000
000020 000001
”, then the order of the extraction will be the 20th, 19th, 18th… and the leftmost.
5. To extract only one character, make start position equal to end position.
Data Packaging
Introduction
Data packing is designed for a specific group of users who want to have the data packed before transmission. Data
packing influences data format, so it is advised to disable this feature when it is not required.
Barcode Type Section