Newcon Optik LRB 4000CI, Руководство по эксплуатации

Страница: 30 / 40

29
5.11 Computer interconnectivity
The unit supports RS-232 interface. The data is
transmitted as hex string code with fixed baud rate of
38400 bit/sec, 8 bits, one stop bit, and no parity.
Physical connection is performed through circular
connector designed for the heavy-duty outdoor
applications, the connector is located on the bottom of the
device. Currently Newcon supplies two types of
connectors, one with quick release connector or screw-
locking connector. Operation with both types is described
in the manual.
Do not apply excessive force when disconnecting
cable. Damage to cable or connector resulting from
improper handling is not covered by warranty.
To attach the cable to the rangefinder match the key on
the plug (1, Fig. 4A, or 1, Fig. 4B) with the corresponding
key on the socket and then push gently the plug holding it
by its casing (3, Fig. 4A or 3, Fig. 4B ), in case of the
cable shown on Fig. 4B you should hear a click meaning
that connector plug and receptacle are latched. In case of
the cable shown on Fig. 4A, start rotating the sleeve until
the plug is locked in the receptacle, do not overtighten the
sleeve as it may damage the thread.