Newcon Optik LRB 4000CI, Руководство по эксплуатации

Страница: 29 / 40

28
of one number, if distance and speed are measured – the
set will consist of two numbers.
To enter
Data Recall mode select rEc from the main
menu. First measurement set number (display name: rEc
1) will start flashing.
Pressing M button moves the unit along the list of
measurement set numbers and measurement results:
rEc 1 , distance 1, azimuth 1, elevation 1,
rEc 2 , distance 2, azimuth 2, elevation 1,
rEc 0 , distance 0, azimuth 0, elevation 0.
Measurement sets are numbered in reverse order: first
recalled set is the result of the last measurement. If any
parameter has not been actually measured it will not be
recalled.
Pressing A button at any moment within the list of
recalled results brings the unit to
Ready to Measure mode.
Choosing cLr at the end of recalled data will erase the
device memory.