Bistro 1
NEWCO Enterprises Phone: 1.800.325.7867 Fax: 1.636.925.0029 12.09.10
- 6 -
To Program the selector switch:
1. When the screen shows “SEL”, on the selector switch
control panel, press the switch labeled Single Shot. The
display will change to identify the switch that you have
chosen as in Fig 6.
2. 2. Press Enter. The number “1” and the current auger
speed will appear in the display, as shown in
figure 7.
3. Using the
+
or
–
button to scroll, set Auger speed for
the desired speed.
Fig 9
Fig 7
BUTTON 6
b:06
1:5
BUTTON 5
BUTTON 3
Fig 6
BUTTON 4
BUTTON 2
BUTTON 1
NORMALLY NOT
USED
