background image

Bistro 1  

 

NEWCO Enterprises              Phone: 1.800.325.7867 Fax: 1.636.925.0029    12.09.10 
 

 

- 11 - 

 

NEWCO PRODUCT WARRANTY

 

 

NEWCO warrants equipment manufactured by it for 1-year parts and labor.

 

 

These warranty periods run from the date of purchase. NEWCO warrants that the 
equipment manufactured by it will be commercially free of defects in material and 
workmanship existing at the time of manufacture and appearing within the 
applicable warranty period. This warranty does not apply to any equipment, 
component, or part that was not manufactured by NEWCO or that, in NEWCO’S 
judgment, has been affected by misuse, neglect, alteration, improper installation 
or operation, improper maintenance or repair, damage or casualty. This warranty 
is conditioned on the Buyer: 1) Giving NEWCO prompt notice of any claim to be 
made under this warranty by telephone at (800) 556-3926 or by writing to PO 
Box 852, Saint Charles, MO 63302 2) If requested by NEWCO, shipping the 
defective equipment prepaid to an authorized NEWCO service location 3) 
Receiving prior authorization, from NEWCO, that the defective equipment is 
under warranty.    
 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY 
OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

 The 

agents, dealers, or employees of NEWCO are not authorized to make 
modifications to this warranty or to make additional warranties that are binding on 
NEWCO. Accordingly, statements by such individuals, whether oral or written, do 
not constitute warranties and should not be relied upon. 
 
If NEWCO determines in its sole discretion that the equipment does not conform 
to the warranty, NEWCO, at its exclusive option while the equipment is under 
warranty, shall either: 1) Provide at no charge replacement parts and/or labor 
(during the applicable parts and labor warranty periods specified above) to repair 
the defective components, provided that this repair is done by a NEWCO 
Authorized Service Representative or 2) Shall replace the equipment or refund 
the purchase price for the equipment. 
 

THE BUYER’S REMEDY AGAINST NEWCO FOR BREACH OF ANY 
OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, 
WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE 
LIMITED, AT NEWCO’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, 
REPLACEMENT OR REFUND. 

 

In no event shall NEWCO be liable for any other damage or loss, including, but not 
limited to, lost profits, lost sales, loss of use of equipment, claim’s of BUYER’S 
customers, cost of capital, cost of downtime, cost of substitute equipment, facilities or 
services, or any other special, incidental, or consequential damages. 

Содержание Bistro 1













Отзывы: