Newco B-10-T3, Руководство по эксплуатации

Страница: 13 / 29

13
Programming-Cont’d
Pressing the “COFFEE-REGULAR” Button will select the Mode Displayed
Pressing the “CAFÉ LATTE” Button will scroll forward through the Select Menu
Choices
Pressing the “VANILLA LATTE” Button will scroll backwards through the Select
Menu Choices
Pressing the “CAFÉ LATTE” button repeatedly will loop the display in 5 Modes:
Maintenance---Statistics---Setup---Calibration –Recipe Entry--Exit Program Mode
Maintenance
1. Press “Coffee-Regular”Button to Select “Maintenance”
2. Press “Café Latte” Button to toggle Select Menu display
Install Sanitizing solution-Push Decaf Button to Start Sanitation Cycle (See Page 24)
Push & Hold Newco Decaf Button to Prime Pump (See Page 25)
Left Whipper Seal Remaining (Remaining powdered drink cycles before changing the whipper seal)
Left Whipper Seal Reset (Select this after changing the whipper seal to reset whipper seal countdown)
Center Whipper Seal Remaining (Remaining powdered drink cycles before changing the whipper seal)
Right Whipper Seal Reset (Select this after changing the whipper seal to reset whipper seal countdown)
Exit Maintenance Mode
Statistics
1. Press “Coffee-Regular” Button to Select “Statistics”
2. Press “Café Latte” Button to Toggle display forward
Total run cycles on machine
Total Gallons water used
Left Hand Hopper Powder Remaining
Center Hopper Powder Remaining
Right Hand Hopper Powder remaining
Exit Statistics Mode
Information Display Only
REPLACEMENT
WHIPPER SEAL
PN 781566
SEE PAGE 21