Part No. 803172 Issued 3-29-13 Rev 012015
2
Installation
1. Carefully remove the dispenser from the
shipping carton.
2.
Before attaching the waterline to the
dispenser, flush the waterline to re-
move any foreign particles that may
be in the line.
NOTE:
It is advisable to use a lime, scale,
sediment, taste and odor purification char-
coal water filter where water quality is a
concern.
3. Connect waterline to inlet fitting on
rear of the dispenser. Fitting may vary.
4. Turn on the water source to the
dispenser.
5.Turn the yellow knob to the ON position
to allow water to flow through the urn.
Product Loading
1. Open the BIB along the perforated edges.
Pull out the dispensing spout.
2. Remove the cap from the spout.
3. Connect the QCD as shown to
dispensing spout. Scholle fitting screws
onto BIB.
Note: THE FITMENT MUST BE PUSHED
ALL THE WAY OUT SO THAT THE
WORD “OUT” IS EXPOSED ON THE
TOP OF THE FITMENT.
4. Place the QCD into the neck of the
dispensing spout at the ridge as
shown on the illustration.
Water
On
Water
Off
Ridge
OUT
Содержание 872DS
Страница 9: ...Part No 803172 Issued 3 29 13 Rev 012015 9...
Страница 10: ...Part No 803172 Issued 3 29 13 Rev 012015 10...