Newco 872B, Руководство пользователя

Страница: 12 / 12

Part No. 803171 Issued 3-28-13 Rev. 011515 12
DIAL REMOVAL
Use 1.5mm hex wrench to remove dial knob. This wrench is supplied with
the unit. IMPORTANT: When removing the dial knob note the position of
the white indicator on the knob. Remove the dial plate after the dial knob is
removed. This area is now open for cleaning and troubleshooting.
When reassembling dial knob to shaft be sure that the white indicator is in
the same position as before. If factory orientation is lost turn the bare dial
knob shaft clockwise until it stops and position the dial as shown above.
Tighten setscrew.
1.5 mm Hex Wrench #803201
3mm x 5mm Setscrew #803200
Dial Knob #803118
Dial
Plate
White
Indicator