14. Put Supporting Bar (Part H) to connect and support Long Beams (Part B). Then lay Wooden Boards
(Part D) and Wire Grids (Part E) to your desired layers. See Diagram 8.
13. Assemble the remaining Long and Short Beams (Part B & C) to your desired location on the Angle Post
(Part A) to create two additional shelves. As shown in Diagram 7.
Note: The posts are adjustable in 40mm increments. You can adjust the shelves to your desired height.
need
more
information
?
try
, www.newageProducts.com
or
1 877 306 8930
for
answers
to
commonly
asked
questions
.
12. Proceed to add two additional Long Beam
(Part B) to top keyholes of the Angle Post
(Part A) as shown in Diagram 6. Install
the beams in the upright position. Assure
to have the rivets in the keyholes before
hitting the beams near the joints to lock the
pieces together.
newage Products Inc. Panel and accessory warranty
10 year limited manufacturer warranty
