f. using the supplied mounting hardware fasten a lag bolt with a large washer through the cabinet and into the
stud. This can be done by hand with a 7/16th socket wrench or a cordless power drill with a 7/16
th
socket
attachment. Do not over tighten bolts!
g. Repeat Step F three additional times with the remaining mounting hardware to install the rack to the wall.
c. Place the rack into position tight against the supporting wall
d. the rack has a perforated strip of holes on the side brackets
e. Align the previously marked stud lines with a perforated hole by shifting the rack slightly
need
more
information
?
try
, www.newageProducts.com
or
1 877 306 8930
for
answers
to
commonly
asked
questions
.
newage Products Inc. Panel and accessory warranty
10 year limited manufacturer warranty
17. For extra stability and to reduce the risk of tipping, you may mount the entire unit to the wall by using the
provided mounting screws.
a. Using a stud finder locate the studs in the wall where the rack is to be placed.
b. Once studs are located, using a pencil and a level mark a vertical line to indicate stud location.
