3. Assemble a Long Beam (Part B) to the other two bottom keyholes of the End Assembly. Assure all
beams are assembled in the upright position as shown in Diagram 2. Hit the beam near the joint with a
rubber mallet to lock pieces together.
4. Repeat last step to add an additional Long Beam, the other Short Beam and two Angle Post (Part A
#2
)
to the End Assembly to create the Bottom Frame Assembly. As shown in Diagram 2.
Notes: 1. All Angle Posts used to create the Bottom Frame Assembly are Part A
#2.
2. Follow the order 1
st
through 5
th
as shown in Diagram 2 to continue the assembly. Hit the
beams near the joints
to lock pieces into place.
5. Now pick a Short Beam (Part C) and join into the top two keyholes of the other two Angle Post (Part A,
ONE
#1 and ONE #2) to create a top End Assembly.
Drive the rivets to the bottom of the keyhole with a
rubber mallet as shown in Diagram 3.
Assembly
1. Unpack the unit and confirm that you have all the parts listed.
Start the end assembly by joining a Short Beam (Part C) into the two bottom keyholes of an Angle Post (Part
A
#2
). Ensure all the beams are always installed with flat edge to the top as shown in Diagram 1. Drive the
rivets to the bottom of the keyholes by hitting the beam near the joint with a rubber mallet to lock the pieces
together.
2. Repeat last step to the second Angle Post (Part A
#2
) creating an End Assembly.
newage Products Inc. Panel and accessory warranty
10 year limited manufacturer warranty
need
more
information
?
try
, www.newageProducts.com
or
1 877 306 8930
for
answers
to
commonly
asked
questions
.
