28
Leak Testing Instructions
WARNING
This must be done before initial use, annually, and whenever any gas components
are replaced or serviced. Do not smoke while performing this test, and remove all
sources of ignition. See Leak Testing Diagram for areas to check. Never conduct a
leak test using fire or flame. Sparks or open flames will result in a fire or explosion,
damage to property, serious bodily injury, or death.
STOP
Testing a Gas Leak
Ensure all control knobs are in the off position.
Turn on the fuel supply.
• For Propane gas turn the cylinder valve knob counter clockwise one full
rotation.
Brush or spray a half-and-half solution of liquid soap and water onto all joints and connections of
the regulator, hose, manifolds and valves.
Bubbles will indicate a gas leak. IMMEDIATELY turn off the gas supply.
See next page for “Fixing a Gas Leak
Leak Testing Diagram
50% WATER
50% LIQUID
SOAP
Propane Gas
Spray
or
Brush
