Newa NEWA Hobby NH 20, Инструкции и гарантия

Страница: 13 / 44

8) Check that all the electrical accessories have no knocks or marks indicating falls or crushing.
9) The power supply cables should be inserted in the socket so that a part of the cable forms a loop at a lower
level than the socket. This will prevent water droplets from entering the socket (Fig.2) by running along the
cable.
10) Always disconnect the plugs when the aquarium is not in use, before inserting or removing its components and before
cleaning. Do not try to disconnect from the socket or the plugs of the appliances by pulling the cable, but disconnect it by hand.
11) Do not touch the power plugs with wet hands or touch the plugs with your bare hands if they are wet.
12)
If the aquarium is within children’s reach, take special precautions and check correct installation and operation several times.
13)
The maximum water temperature conveyed from the pump must not exceed 35°C.
14) WARNING : the symbol
indicates that the electrical appliances must only be used in homes.
15) The aquarium must not run dry.
16) The aquarium has glass components. Handle it with care and position it according to the instructions given in this manual ,
avoiding placing the tank directly on its edges.
EN
17) Do not place the aquarium on tilting surfaces (Fig. 13).
18) After installation, do not move the aquarium. If necessary, only move it if the tank is completely empty.
19) Each component is an integral pa rt of the aquarium and must not be used with other products.
20) Do not use the aquarium for food use.
21) Do not use the aquarium as a terrarium.
22) Do not use the aquarium if it is damaged and /or dismantled.
23) Do not damage and/or remove the seal on the couplings of the glass panels of the tank.
24) Do not place rocks, stones or other heavy ornamental elements directly on the bottom of the tank.
25) Do not position any objects on the aquarium.
26) It is important for the aquarium, just like all other electrical appliances, to be protected upstream by a special
differential safety switch (safety cutout) with a trip current of Idn < 30 mA.
27) We recommend to switch-off the lamp off during maintenance and never fix it when it is on.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
II. TECHNICAL DATA
Version (220-240V, 50Hz) NH 20 NH 30 NH 60
Dimensions Height (mm) 290 335 400
Width (mm) 420 475 625
Depth (mm) 205 275 325
Weight
Dry (Kg) 3,63 6,80 10,00
Capacity Volume (l) 20 30 60
Heater Type --- --- NTT50
Power (W) --- --- 50
Pump Flow rate (l/h) 80 - 190 100 - 250 270 - 540
Power (W) 2,6 3 5,1
Lighting
Rated input (W) 4,5 4,5 5
Lumen 657 657 670
Kelvin (K) 6500 6500 6500
13