Administrator Manual OM Series IP Telephony System
4-2 www.newrocktech.com
Figure 4-3 CID detect setting interface 2
4.3 SIP Trunk Registration to an ITSP
Step1
Configure ISTP server related settings
Go to the
Trunk > IP trunk registration
page. See Figure 4-4.
Figure 4-4 IP trunk registration setting interface
Step2
Enter username and password
Go to the
Trunk > IP trunk
page. See Figure 4-5.
Figure 4-5 IP trunk setting interface
Step3
Verify the registration status
After configuration, go to the
Logs
>
Resource
page to check the status of registration.
The central office sends caller ID either
before or after ringing. The caller ID detection
should be configured accordingly.
Note: when the device fails to detect the caller
ID, different mode listed here should be tried
out.
Input information required by the
service provider.
Enter phone number and password assigned by the service, and click
Add
.
