OM Series IP Telephony System Administrator Manual
New Rock Technologies, Inc. 1-3
Go to the
Basic > Network
page for network settings. See Fig. 1-3.
Figure 1-3 Network setting interface
Table 1-2 Network parameters
Item Description
Static
To assign a static IP address. This is the default setting.
DHCP
Use the dynamic host configuration protocol (DHCP) to allocate IP addresses.
PPPoE
Select PPPoE when ADSL modem is connected to the device, and enter username and
password obtained from ISP.
1.4 Port Forwarding
Port forwarding is used to permit external hosts to communicate with the device installed behind a
router in a private local area network. Such communication is required in remote device management,
SIP terminal registration to the device and the SIP trunk between the device and an external device.
The port forwarding is configured on the router, and the example of the configuration on a router is
illustrated in Fig. 1-4.
Figure 1-4 Port forwarding interface of router
The WAN port IP address of the router is static
Go to the
Basic > Domain name
page and enter WAN port IP address of the router. See Fig. 1-5.
