User Manual MX100E SIP-ISDN Gateway Series
5-28 www.newrocktech.com
5.5 Status
In case of full configurations, the MX100E has one 4T1/E1 card, with four interfaces numbering
ISDN1 to ISDN4 from left to right. Users can view the ISDN calling state on the interface in usage.
The calling information about ISDN (1) is used as an example.
After login, click
Status > ISDN1
tab to open the interface.
Figure 5-21 ISDN Status Interface
Table 5-20 Status Parameters
Name Description
Call
The call state involves idle, outpulsing, ringing, dialling, initiating a call, ring back, talking,
on-hook on the local end, and on-hook on the opposite terminal.
5.6 Log Management
5.6.1 System Status
Critical runtime information of gateways can be obtained in this interface, including:
The information about login interface (including IP address and permissions of the user)
SIP registration status
Call-related signaling and media (RTP) information
After login, click the label of
Logs > System Status
to open this interface.