New Rock Technologies MX100E Series, Руководство пользователя

Страница: 45 / 57

MX100E SIP-ISDN Gateway Series User Manual
www.newrocktech.com 5-25
Name Description
Calling party number in call
transfer Under call forwarding, the calling party number sent can be choose from Originating
number or Forwarding number being set for sending, the default is
Forwarding
number .
For example: the subscriber line 2551111 on the gateway activates call forwarding
feature and set the destination to 3224422. When caller with 13055553333 calls
2551111, the call will be forwarded to 3224422:

If choose Originating number , the number 13055553333 will be sent to 3224422
as calling party number.

If choose Forwarding number , the number 2551111 will be sent to 3224422 as
calling party number.
Replace 18X with 180

Send 180: If this parameter is set to enable, the gateway will map all alerting
messages (ALERTING with and without in-band indicator) to 180. An example of
when this parameter would be enabled is when an IAD does not support a 183
message.

Send 18x: If this parameter is set to enable, the 18x message will be sent.
Do not validate Via Set whether to ignore Via field, By default, Via is ignored.
Register upon INVITE
timeout Set whether to activate registration when SIP message of INVITE is failed or time
expired, and by default, re-registration is not selected.
5.4.10 RADIUS
After login, click the label of
Advanced > RADIUS
to open this interface.
Figure 5-18 RADIUS Configuration Interface
Table 5-17 RADIUS Configuration Parameter
Name Description
Primary server Set IP address and port number of preferred Radius server.
Note: if the port number is not configured yet, please use Radius default port number of 1813.
Key Set the share key to be used for encrypted communications between Radius client and server.
Note: the share key should be configured the same for both client and server side
Secondary server
Set the IP address and port number of standby Radius server. When the fault appears in
communications between gateway and preferred Radius server, the gateway will automatically
activate standby Radius server.
Note: in case of no configuration of port number, use default port number of 1813.
Key The share key for communications between Radius client and standby Radius server.
Note: the key should be configured the same for both client and server side