New lift FST-2XTs, Руководство пользователя

Страница: 11 / 50

FST jumpers
Generalsafetyregulations
ManualforreplacingFST-2swithFST-2XTs 11
FST-2XT and FST-2XTs jumper J131-J136: definition of the shaft positioning
The position of the shaft positioning system (car or shaft) is defined with J131, J133, J135, J136.
Shaft positioning system on the car; FSM-2 X25:
›all jumpers are jumped to 1-2.
Shaft positioning system in the shaft or machine room; FST X12:
›all jumpers are jumped to 2-3
›depending on the type of shaft positioning, two (incremental positioning with zone magnets) or four (absolute
value positioning) freely travelling cable cores are available at terminal FSM-2 X15 / FST X13.
A+ / CLK+ A- / CLK- B- / DA
TA-
B+ / DA
TA+
J136 J136
J135 J135
J131 J131
J133 J133
X12.2 X12.2
X25.2 X25.2
FST-2 X30.16 FST-2 X30.16
FSM-2 X30.16 FSM-2 X30.16
.4 .4
.4 .4
.3 .3
.3 .3
.15 .15
.15 .15
X13.1 X13.1
Jumper setting 1-2
Connection of the position encoder in the machine room; FST-2 X12
Connection of the position encoder on the car; FSM-2 X25
Jumper setting 2-3
X15.1 X15.1
TC TC
up to four free travelling cable
cores; FSM-2 X15 / FST-2 X13
if TC →
necessary BC →
BC BC
.2 .2
1 2 3 1 2 3
.2 .2
.3 .3
.3 .3
.4 .4
.4 .4
.5 .5
.6 .6
.7 .7
.7 .7
.4 .8
.4 .4
.8 .4
.8 .8
Positioning
A+ / CLK+ A- / CLK- B- / DA
TA-
B+ / DA
TA+
Positioning
Fig. 3.1: Connection point of the position encoder and jumper setting J131, J133, J135, J136