manualshive.com logo in svg

New lift FST-2XTs, Руководство пользователя

Поделиться
Скачать
New lift FST-2XTs Скачать руководство пользователя страница 5

General

Abbreviations,charactersandsymbolsused

ManualforreplacingFST-2swithFST-2XTs

5

1 

General

This manual is intended to simplify the replacement of the FST-2s circuit board with the FST-2XTs circuit board.

 

► Read this manual carefully and observe the FST-2s/XTs Installation & Commissioning manual as well as the 

included circuit diagrams and jumper settings for the circuit boards before beginning the replacement. 

 

► After replacing, perform the tests listed under certificates “FST-2XTs 51 00 - notices” on pages 1 and 3. 

 

► Update the documents of the lift system on-site as well as other documents that may be present at the “desi-

gnated entity”. A check of the parameters and functions transferred from the FST-2s circuit board or of the 
NEW 

LIFT

 factory parameter set is the responsibility of the person who performs the replacement. 

As assistance here, the test actuations as described in the FST-2XT or FST-2XTs Installation & Commissioning 

manual under 6.7.4 are to be performed. The FST-2XTs circuit board is generally compatible with the FST-2s 

circuit board. There are, however, additional functions resulting from further developments, relating to the EN81-

1/2:1998 + A3:2009 A3 in particular, that are to be observed.

1.1 

Abbreviations, characters and symbols used

EAZ 

position indicators

 Delivery condition

Settings that are supplied as standard are marked with an asterisk 

.

► 

Activity symbol

:

Activities described after this symbol must be carried out in the given order.

 Safety-relevant information

This symbol is located in front of safety-relevant information.

Information notice

This symbol is located in front of relevant information.

1.2 

Further information

The following documents, among others, are available for the FST control system and its components:

 ›FST Installation & Commissioning
 ›FST manual
 ›ADM manual
 ›FPM manual
 ›SAM manual
 ›EAZ-256 manual
 ›EAZ-LCD and EAZ-VFD manual
 ›Fire recall manual

These and other current manuals can be found in the download area of our website under Service at http://

www.newlift.de/en/service/download

1.3 

How to contact us

If, after referring to this manual, you still require assistance, our service line is there for you:
Tel 

+49  89  –  898  66  –  110 

Mail 

[email protected]

Mon. - Thurs.: 

8:00 a.m.  –  12:00 p.m. and 1:00 p.m.  –  5:00 p.m. 

Fr: 

 

8:00  a.m. –  3:00 p.m.

Содержание FST-2XTs



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды