New Holland WORKMASTER 35, Руководство оператора

Страница: 86 / 180

4 - OPERATING INSTRUCTIONS
Brakes
Brake pedals
WARNING
Loss of control hazard!
Always reduce the traveling speed and use the
steering wheel while you make a turn. When
you operate the machine at high speeds, never
attempt to make sharp turns by using the turn-
ing brake pedals.
If you use the individual
brakes at high speeds, the machine could be-
come machine unstable.
Failure to comply could result in death or se-
rious injury.
W1237A
The right brake pedal controls the braking action of the
right rear wheel. The left brake pedal controls the braking
action of the left rear wheel.
The function of the brake pedals are identical for the HST
and gear model tractors except for the location of the ped-
als. The brake pedals
(1) on a HST model tractor are lo-
cated on the left-hand side of the operators platform and
the brake pedals
(2) on a gear model tractor are located
on the right-hand side of the operators platform.
Stopping the tractor
To stop a gear model tractor, depress both brake pedals
and the clutch pedal simultaneously.
To stop a HST model tractor, release the HST forward or
reverse pedal and depress both brake pedals simultane-
ously.
NOTE: To assist in making sharp turns at slow speed,
depress the right or left brake pedal as required.
NOTE: Depressing the brake pedals will disengage the
HST cruise control.
Brake pedal lock
The brake pedal connecting pin (3) is used to secure the
brake pedals together. Lock the pedals together when-
ever the tractor is operated at high speeds or when the
tractor is used on the highway.
NHIL12CT00691AA
1
NHIL12CT00775AA
2
4-18