New Holland WORKMASTER 35, Руководство оператора

Страница: 66 / 180

3 - CONTROLS AND INSTRUMENTS
Mid mount two spool hydraulic valve
The (optional) mid mount two-spool hydraulic valve (1)
is mounted to the valve mounting bracket, located at the
right front of the operator’s platform. This valve is used
mainly for front end loader operation, but may also be
used to operate other front mounted implements.
NHIL13CT00001AA
1
Valve operation
To operate the two-spool valve, move the control lever (2)
in any of the four directions.
Release the control lever to stop the cylinder in any posi-
tion, the lever automatically returns to neutral.
NOTE: If you move the control lever diagonally the loader
and bucket will operate at the same time.
• Move the control lever forward to lower the loader or
retract lift cylinders (A) .
• Move the control lever fully forward to "FLOAT" the
loader boom (B) which allows the lift cylinders to extend
or retract freely.
• Move the control lever rearward to raise the loader or
extend lift cylinders (C) .
• Move the control lever to the left to curl the bucket or
retract the bucket cylinders (D) .
• Move the control lever to the right to dump bucket or
extend cylinders at slower rate. (E) .
• Move the control lever fully to the right to dump bucket
or extend cylinders at faster rate. (F) .
NOTE: Do not use the "FLOAT" position if the loader is
raised to its highest position.
SBA86532911N
2
Valve lock
This style of mid mount two spool valve does NOT have
a valve lock feature.
3-20