New Holland WORKMASTER 35, Руководство оператора

Страница: 117 / 180

7 - MAINTENANCE
After first 50 hours
Engine oil and filter
NOTE: Change the engine oil and filter after the first 50
hours of operation, then every 300 hours thereafter. If the
tractor is operated for extended periods of time at maxi-
mum rated power and speed, or under other types of con-
tinuous, severe operating conditions, the engine oil and fil-
ter should be changed at 200 hour intervals following the
initial oil change.
To change the engine oil:
1. Place a suitable container beneath the drain opening
to catch the used oil. With the tractor engine off but at
normal operating temperature, remove the drain plugs,
(1) . Reinstall the plugs after all of the oil has been
drained.
NHIL12CT00696AA
1
NOTE: There are two drain plugs in the oil pan, one on each side of the engine.
2. Next, place a container below the oil filter, (2) , to catch
the used oil and unscrew the oil filter. Discard the used
oil and filter.
3. Coat the gasket on the new filter with a film of clean oil.
Screw the filter into place until the gasket contacts its
mating surface, then turn the filter approximately three-
quarters of a turn by hand. Do not overtighten.
4. Add the proper type and level of new oil, then start the
engine and check the filter for leaks.
NHIL12CT00694
2
NOTE: Oil Capacity, with filter 6.5 l ( 6.9 US qt )
Recommended Oils
Ambient Temp (°F) Recommended Oil
-12 - 49 °C ( 10 - 120 °F ) NEW HOLLAND AMBRA MASTERGOLD™ HSP
ENGINE OIL SAE 15W-40
-23.3 - 49 °C ( -10 - 120 °F ) NEW HOLLAND AMBRA MASTERGOLD™ HSP
ENGINE OIL SAE 10W-30
-29 - 16 °C ( -20 - 60 °F ) NEW HOLLAND AMBRA MASTERGOLD HSP SAE
5W-30
Oil Specification API CF-4 or CH-4
NOTE: Tractors are originally shipped with (15W40) oil.
7-9