New Holland 667TA/EBF, Руководство по ремонту

Страница: 140 / 150

2-122
Issued 11-06 Bur 87519804 NA
CHAPTER 2 - 667TA ENGINE OVERHAUL
ENGINE REPAIR MANUAL
STEP 170
BS06K399 Figure 2-273
Complete engine installation as follows.
From the right side:
•
Install the starter (5) to the flywheel housing (4)
and tighten the fastening nuts to 50 to 60 Nm (36.9
to 44.3 lb.-ft.) the specified torque.
•
Install the oil line (3) with a new sealing ring into
the engine block and secure it to the turbo-charger
(1) by the bolts (2) and tighten to 20 to 30 Nm
(14.8 to 22.1 lb.-ft.) the specified torque.
STEP 171
BS06K400
Figure 2-274
Install the bracket (2) including the fuel filter bracket
(1) to the engine block, tighten the bolts (3) to the
general bolt torque specifications in the repair
manual.
STEP 172
BS06K401 Figure 2-275
By hand screw on the fuel filter to the bracket (1).
Tighten the fuel filter 3/4 of a turn after the gasket
makes contact with the bracket. Connect the fuel
lines (2,3,4) to the relevant support connections (1)
as shown in the following figure (step 171).
STEP 173
BS06K388 Figure 2-276
Press the clamp (1) as shown in (figure B).
After connecting the line reset the clamp (1) to the
initial locking position (A), to prevent deformations.
NOTE: when installation is complete, fill engine with
the proper lubricating oil.
1
2
3
5
4
1
2
3
1
2
3
4
5
A
1
B
1