New Holland 667TA/EBF, Руководство по ремонту

Страница: 137 / 150

2-119
87519804 NA Issued 11-06 Bur
CHAPTER 2 - 667TA ENGINE OVERHAUL
ENGINE REPAIR MANUAL
STEP 162
BS06K391
Figure 2-265
Connect the electrical cables (1) to the injectors (3)
and use Special Tool 380000158 torque wrench (4)
to tighten the fastening nuts (2) to the general bolt
torque specifications in the repair manual.
STEP 163
BS06K392 Figure 2-266
Install a new gasket (2) on the tappet cover (1).
STEP 164
BS06K393
Figure 2-267
Install the tappet cover (1) and tighten the nuts (2) to
20 to 30 Nm (14.8 to 22.1 lb.-ft.) the specified torque.
STEP 165
BS06K394
Figure 2-268
Re-attach exhaust manifold (6) with new gaskets.
Screw securing bolts (5) and tighten them to
48 to 58 Nm (35.4 to 42.8 lb.-ft.) the specified torque.
Re-attach turbo-charger (1) to exhaust collector (6)
with a new gasket and tighten securing nuts (7) to
20 to 30 Nm (14.8 to 22.1 lb.-ft.) the specified torque.
Connect line (2) to turbo-charger (1) support (3).
Connect oil line (4) to heat exchanger support.
STEP 166
BS06K395 Figure 2-269
Connect the air duct (2) to the turbo-charger (3) and
lock it with clamp (1).
1
2
3
4
1
2
1 2
1
2
3
4
5
7
6
1 2
3