NEW ENERGY NERS-B1.0S-P, Инструкция по установке и эксплуатации

Страница: 14 / 22

13
Under power off state, press “SET”
to set the temperature
Under power off state, press “SET” enter parameter setting interface. Parameter 0 represent pipe electric heating
setting temperature, parameter 01 represent heating setting temperature, press “▲”and“▼”to adjust the setting
temperature. Parameter 2 and 15 is system parameter, press “▲”and“▼”together for 10S, when hear of “B”, release
the button, then press “▲”or“▼”to adjust the parameter. When finished setting, press “SET” to save and switch to
other parameter. Under this interface, if no operation within 8S, save the current setting then exit parameter setting
state and return to main interface.
2.5 Water temperature and parameter setting / state parameter query
Temperature adjustment area blinkling,
press “▲”and“▼” to set (10~60
℃
)
Water temperature setting
（
parameter 0~1 ）
System parameter setting(parameter2~C)
Under power off state, press “SET”
to set the system parameter Parameter setting area blinking,
press “▲”and“▼” together for 10S,
when hear of “B”, release the button,
then press “▲”or“▼”to adjust the
parameter.
State parameter query(parameter F~13)
Press “SET” enter temperature
query state, display parameter
F: Water temperature Press “SET” and display
parameter F: Coil temperature
Press “SET
"
and display
parameter E: Compressor
outlet temperature