NEW ENERGY NERS-B1.0S-P, Инструкция по установке и эксплуатации

Страница: 3 / 22

ATTENTIONS:
1. Please make sure the water systems should be filled with water before the machine start working
2. When the machine is operating, all the valves of the water systems must be in the open position.
3. If without inlet water or stop using for a long time, when re-boot the machine, please according to
the item of attentons.1.
4. A removable filter must be installed at the water inlet and please clean the valve periodically depend
on your locate water quality (every 2 or 3 months).
5. The maximum water temperature is 60C .When you use the water, please adjust the water
temperature to a appropriate temperature (The most comfortable water temperature for shower is
38~42C , if the water temperature above 50C , there will be danger of burns!)
6. The maintenance of the machine must be carried out by the professional personnel.
Ⅰ Prologue
2
Thanks for using heat pump water heater! Please read this manual carefully before installation and
operation! This manual contains the information about installation, commissioning, operation, and
maintenance. The following items should be focused:
1. Before installation, please confirm if your local voltage is match with the voltage showed on the
machine's nameplate and if the carrying capacity of the power supply, wires and sockets are
suitable for this machine's input power.
2. Users are not allowed to change the power cord or socket. Wiring work must be carried out by a
qualified electrician and ensure that the metal part of the machine has a good grounding. Changing
the ground mode is strictly forbidden.
3. After the completion of the construction of all wiring work, please make sure to recheck everything
is well before power on.
4. Installing the machine in the place which the combustible gas may leak is strictly forbidden.
5. Do not put your hands or foreign objects into the air outlet of heat pump unit, otherwise, it will be
dangerous to the people and equipment.
6. In order to obtain a better energy-saving effect, the unit should be installed in a place with well-
ventilated.
7.If the unit power off,please discharge all the water inside.Otherwise,the heat exchanger will be
frozen in winter.