7
Configuring the Build
There are two configuration parameters specific to the VeeCAN devices. These can be set by
opening the Target Definition block at the top of the model.
Figure 2.1.3.a – Build Configuration Settings in the Target Definition Block
Compiler
There are actually two parameters to choose for
Compiler
,
Device
and
Simulator
. If a compiler is
selected (not set to ‘
none’
) for device, then a device binary to program a physical VeeCAN 800 will be
generated. If a compiler for
Simulator
is selected, then the same code will be compiled and loaded into
a simulator executable.
Figure 2.1.3.b – Compiler Settings in the Target Definition Block