10
Hard Reset
Occasionally software loaded onto the display may cause it to become inoperable. Sometimes a
startup sequence will put the device into a loop that prevents traditional programming, or a program
may simply crash on startup. When this happens there is a hard-reset option available.
From the hardware manufacturer:
Make sure the power is off then insert the USB Stick into the USB Port. Turn on the power
while simultaneously holding down the small red button right next to the USB port on the
back of the unit. The screen will turn blue and after a few seconds the update process will
begin. There will be on-screen information during the update process. Please remove the USB
Stick when prompted and the target unit will automatically reboot into the new software.
Figure 2.1.4.b – Hard Reset Button
