New Communications Solutions NCS-3230 Multi-Rx Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 18

New Communications Solutions NCS-3230 Multi-Rx Скачать руководство пользователя страница 9

4.0 Operating with the Multi-Rx

4.1 Audio levels

Adjust the volume control on each connected receiver so that the
corresponding BUSY light is activated when received audio is heard.

4.2 Mode Selection

4.2.1 NORMAL mode

Moving the MODE Switch to the “out” position selects

Normal

operation of the Multi-Rx

TM

. In this mode, radios selected on the

top row of switches will be heard on the left speaker. Radios
selected on the bottom row of switches will be heard on the right
speaker. Radios selected on both rows of switches will be
connected to both speakers so they will be heard centered between
the two speakers. The Balance control can be adjusted to
compensate for the operator being closer to one speaker than the
other.

4.2.2 SPATIAL mode

Moving the MODE Switch to the “in” position sets

Spatial

operation

of the Multi-Rx

TM

. In this mode, each radio has a pre-assigned

location in the audio field as shown below:

Selecting a radio with it’s corresponding top row button turns on it’s
audio in the pre-assigned location. Selecting a radio with the
bottom row of buttons sends the radio’s audio to both speakers
equally, thus centering the audio in the sound field.

NCS-3230 Rev C Instruction Manual

Copyright © 2003, 2004 New Communications Solutions, LLC

9

«
...
7
8
9
10
11
...
»

Содержание NCS-3230 Multi-Rx



















Отзывы:

Нет отзывов