New Communications Solutions NCS-3230 Multi-Rx Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 18

New Communications Solutions NCS-3230 Multi-Rx Скачать руководство пользователя страница 13

NCS-3230 Rev C Instruction Manual

Copyright © 2003, 2004 New Communications Solutions, LLC

13

Distortion

Distorted audio can be caused by one of two situations. The first and
most common is improper adjustment of audio levels. Be sure you’ve
adjusted the radio(s) volume controls as recommended in this manual.

RF in the shack can also cause distorted audio. To determine whether
this is the problem, connect your transmitter to a dummy load. If the
distortion disappears, then you have RF floating around the shack. To
eliminate RF problems, first make sure you have set up the jumpers and
radio cables correctly. Then check that you have a good ground between
all pieces of equipment and that your RF ground is low impedance. Refer
to any reliable Amateur Radio publication for detailed information on RF
problems and RF grounding.

5

Getting Help from NCS

NCS wants you to experience trouble free operation of our equipment. If
you have any questions, comments or need technical help, please use the
following resources:

1. Go to the web site,

www.ncsradio.com

.

Here you will find the latest instruction manuals, any factory
developed modifications and Frequently Asked Questions.

[email protected]

Be sure to include all pertinent information, e.g. make and
model of radios, how they’re connected to the Multi-Switcher

TM

,

detailed description of any problems, antenna and grounding
configurations, etc.

3. Telephone us toll-free at 888-883-5788.

Be near your equipment and have the manuals for your radios
available. We will do our best to help you using our technical
expertise.

«
...
11
12
13
14
15
...
»

Содержание NCS-3230 Multi-Rx



















Отзывы:

Нет отзывов