NEW BRUNSWICK SCIENTIFIC CO-150, Руководство по эксплуатации

Страница: 31 / 40

31
New Brunswick Scientific User’s Guide
5
5
C
C
L
L
E
E
A
A
N
N
I
I
N
N
G
G
&
&
D
D
I
I
S
S
I
I
N
N
F
F
E
E
C
C
T
T
I
I
N
N
G
G
5.1 Cleaning
1. Routinely clean the exterior of the incubator by wiping it over with a soft cloth,
moistened with soapy water.
2. Rinse the soap from the cloth in clean water, and wipe the exterior surfaces again.
5.2 Disinfecting
The recommended disinfecting agent for use with the incubator is a solution of 70%
isopropanol (iso-propyl alcohol) and 30% distilled water. Be sure to follow
appropriate safety regulations while you are using this solution:
To best protect yourself, your incubator and your work area, follow these
instructions:
1. Program 0.0% CO
2
and switch off the incubator. Unplug the unit from the power
supply.
2. Dampen a clean cloth with the alcohol solution and wipe down all external
surfaces, taking care to keep the alcohol solution from coming into contact with
any electrical outlets or assemblies.
3. Remove all of the shelves, the humidity tray, and the shelf racks.
4. Place the black protective cover over the CO
2
sensor.
CAUTION!
It is very important to ensure that no liquid is spilled onto the
white porous CO
2
sensor cover at the rear of the chamber.
Failure to use the protective cover could result in damage to the
sensor and may affect your warranty.
WARNING!
As a routine precaution, wear protective gloves.
Be sure to adequately ventilate the work area as you are
disinfecting, to avoid the formation of potentially explosive
alcohol vapors.
Protect all electrical connections from contact with the
alcohol solution.