manualshive.com logo in svg

Neve Neve 4081, Руководство пользователя

Поделиться
Скачать
Neve Neve 4081 Скачать руководство пользователя страница 23

4081 User Manual

Issue 3

 Fit the other ends of the 26 way ribbon cables to the FireWire expansion 

board as indicated in the photograph below.

Please note that both 26-way ribbons need connecting.
The photograph above shows the 2nd ribbon disconnected to show the 

orientation of both cables and the contacts.

 Screw the back panel of the expansion board to the 4081 chassis using 

the screws which were used to fit the original blanking plate, and re-use 

the M3 screws which were replaced by the mounting pillars to screw the 
FireWire board to the posts.

 Connect the 2 pin power cable between J16 of the expansion board and 

the power distribution board mounted on the front panel of the unit, as 

shown below.

The power connector is polarised, so can only be fitted one way.

The FireWire expansion board is now fitted to your 4081. 

Once the board has been fitted, please download the appropriate FireWire 

driver from our website.
There are two drivers available, one for Mac and one for PC.

Mac:

http://www.ams-
neve.com/Sites/8/Files/Documents/Outboard/FireWire_Installer.zip

PC:

http://www.ams-
neve.com/Sites/8/Files/Documents/Outboard/FireWire_Installer.exe

Install the relevant driver on the Mac or PC that is running the Neve 

remote control software. 

- 23 -

Содержание Neve 4081

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды