Nevadent 311864, Руководство по эксплуатации

Страница: 51 / 74

■ 48 │
GB
│
MT NAZ 2.4 C3
First use
NOTE
Before starting to use the appliance, check that it is in fault-free condition. You
must not use the appliance if it has any faults.
1) Insert the power plug into the socket.
2) Before the first use, clean the new brush heads with clear water.
3) Open the lid of the brush holders
-
and place the replacement brush
heads in the four slots provided. Close the lid again.
4) Place the handset on the charger so that it slides onto the pin on the
base.
5) Allow the handset to charge up for around 14 –16 hours before using it for
the first time. The charging light on the front of the handset lights up red
during the charging process.
6) Use the handset repeatedly without charging the battery until the performance
becomes noticeably weaker or the toothbrush stops working and the charge
indicator
flashes red. Then recharge the battery for 14 –16 hours. When
the appliance is fully charged, the charge indicator lights up green.
7) Charge and discharge the toothbrush completely 3 times. The battery will
have then reached its full capacity.
8) You can now leave the handset in the charger after every use, so as to
always have full power available.