Supplementary
Electric Heaters
for Air Handler Installations
INSTALLER'S
GUIDE
IMPORTANT
— This Document is customer property and is to remain with this unit. Please return to service information
pack upon completion of work.
ALL phases of this installation must comply with NATION-
AL, STATE AND LOCAL CODES
18-GJ09D1-10A-EN
Models:
BAYEVAC04BK1B
BAYEVAC04LG1B
BAYEVAC05BK1B
BAYEVAC05LG1B
BAYEVAC08BK1B
BAYEVAC08LG1B
BAYEVAC10BK1B
BAYEVAC10LG1B
BAYEVBC15BK1B
BAYEVBC20BK1B
BAYEVAC10LG3B
BAYEVBC15LG3B
Table of Contents
....................................................................................................................................... 1
Section 2. General Information
Section 3. Heater Assembly Labeled
.......................................................................................................................... 2
.......................................................................................................................................... 3
............................................................................................................................................... 5
............................................................................................................................................... 7
......................................................................................................................................................... 12
Section 8. Sequence of Operation
Section 1. Safety Information
s
s
WARNING
SAFETY HAZARD!
This information is intended
for use by individuals possessing adequate back-
grounds of electrical and mechanical experience. Any
attempt to repair a central air conditioning product
may result in personal injury and/or property damage.
The manufacturer or seller cannot be responsible for
the interpretation of this information, nor can it as-
sume any liability in connection with its use.
LIVE ELECTRICAL COMPONENTS!
During
installation, testing, servicing, and troubleshooting
of this product, it may be necessary to work with live
electrical components. Failure to follow all electri-
cal safety precautions when exposed to live electrical
components could result in death or serious injury.
s
s
WARNING
SAFETY HAZARD!
Sharp Edge Hazard. Be care-
ful of sharp edges on equipment or any cuts made
on sheet metal while installing or servicing. Personal
injury may result.
CAUTION
HAZARDOUS VOLTAGE!
Disconnect all electric
power, including remote disconnects before servicing.
Follow proper lockout/tagout procedures to ensure
the power can not be inadvertently energized. Failure
to disconnect power before servicing could result in
death or serious injury.
s
s
WARNING
Содержание BAYEVAC04BK1B
Страница 15: ...Page 15 INSTALLER S GUIDE ...
