Neuron-Spectrum-1/V (Technical Manual)
10
All the processors receive commands and transmit data through the USB processor
which forms the data packets to transmit them to the PC and deciphers data transmit-
ted from the PC to control the modules.
The system operates under the control of PC (IBM PC type) with the mouse, key-
board, laser or jet printer and installed licensed Windows 8.1 (or later versions) opera-
tional system.
Signal processing, displaying and presentation in different modes after mathematical
analysis, then storing of the initial data on the hard disk, exam report generation and
printing is done using PC.
1.3. Connectors and Indicators
The front and side panels of the
Neuron-Spectrum-1/V
system are shown in Fig. 2
and Fig. 3.
The touch-proof connectors for electrode cables attachment, LED operation indicator
and impedance indicators are located on the front panel (Fig. 2).
Fig. 2. Front panel of
Neuron-Spectrum-1/V
.
EEG channels are marked as “FP1…O2”, “A1”, “A2”, polygraphic channel is marked
as “1”. The slot is used to attach the ground electrode.
