LIS-SDI Rev.
2
network-electronics.com
|
8
3. Connector module
The LIS-SDI has its own connector module: FRS-SDI-C1, mounted at the rear of the sub-
rack. See Figure 2.
Figure 2: FRS-SDI-C1 connector module.
3.1 Mounting the connector module.
If the connector module is purchased separately, it should be mounted as described in the user
manual for the sub-rack frame FR-2RU-10-2. This manual is also available from our web site:
http://www.network-electronics.com/
3.2 Correspondence of connectors and signals
The FRS-SDI-C1 connector module has 7 BNC's:
SDO1
Line synchronized SDI output.
SDO2
Line synchronized SDI output.
SDO3
Line synchronized SDI output.
SDI-IN
SDI input.
BB Black&Burst
input
BB-DUP Black&Burst passive loop through.
SDI-OUT SDI-IN reclocked and buffered.
SDO1, SDO2 and SDO3 are equivalent 270 Mb/s SDI outputs.
