4
Installation
The Local Unit
1. Plug the blue 15HD cable of the Local Unit into the VGA port on the back of the CPU. (See Fig. 1.)
Figure 1- Connect the Local Unit to the CPU
2. Connect the video cable from the local user's VGA monitor to the female 15HD port on the
Local Unit.
Figure 2- Connect Local User's Monitor to Local Unit
3. Connect the CAT5 cable to the “Cat 5” port on the Local Unit. (See Fig. 2.) When properly inserted
the cable end should snap into place.
Note: If an RJ45 wall outlet is being used, connect the other end of the extension cable to the
RJ45 wall outlet.
WARNING: Never connect the ST-C5V-600 Extender to an ethernet card, ethernet router,
hub or switch or other ethernet RJ45 connector of an ethernet device.
Damage to devices connected
to the ethernet may result.
Installation
!
S T - C 5 V - 6 0 0 L o c a l U n i t
1 5 H D F e m a l e
V i d e o C o n n e c t o r
C P U
V I D E O
C O N N E C T O R
1 5 H D M a l e
V i d e o C o n n e c t o r
N T I
R
N e t w o r k T e c h n o l o g i e s I n c
X T E N D E X
-
+
V G A
M u l t i - S c a n
M o n i t o r
1 5 H D F e m a l e
V i d e o C o n n e c t o r
C A T 5 C a b l e t o
R e m o t e U n i t
L o c a l U s e r ' s M o n i t o r
Y e l l o w P o w e r L E D
S T - C 5 V - 6 0 0 L o c a l U n i t
N
TI
R
N
et
w
or
k
Te
ch
no
lo
gi
es
In
c
X
TE
N
D
E
X
