1
Introduction
The XTENDEX Series ST-C5V-600 Video Extender is designed to enable one CPU to be viewed by two
monitors, one local and one remote. The remote monitor can be located as much as 600 feet away from a CPU
via Category 5 unshielded twisted-pair cable. The local monitor will be located near the CPU.
The XTENDEX Series ST-C5V-600 Video Extender is extremely simple to install and has been thoroughly
tested to insure reliable performance. Through the use of Category 5 unshielded twisted-pair cable it is possible
to economically increase the flexibility of a computer system. Here are some of the features and ways this can
benefit any workplace:
•
Allows the placement of a monitor in a location where only this is needed without having
the CPU there too, taking up valuable space
•
Allows a CPU to be viewed by both a local and remote user (up to 600 feet away)
•
Compatible with XGA, VGA, and SVGA systems
•
Provides crisp and clear resolution up to 1280 x 1024 @ 600 feet
•
Compatible with all NTI video switches and splitters, enabling the joining of products to create a
system that satisfies all networking needs
•
Video quality is manually adjustable to provide optimum image quality
Materials
Materials Included with this kit:
9
NTI ST-C5V-600 Video Extender Local Unit
9
NTI ST-C5V-600 Video Extender Remote Unit
9
120VAC or 240VAC at 50 or 60Hz-9VDC/1.5A AC Adapter
9
This owner's manual
Additional materials may need to be ordered, depending upon the configuration
:
¾
VEXT-xx if the Local Unit will be located further than 15" from the CPU or NTI switch
¾
CAT5 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1,
etc. (see pg. 8 for proper EIA/TIA 568 B wiring method)
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324)
in US & Canada or 330-562-7070 (Worldwide) or at our website at http://www.nti1.com and we will be happy to
be of assistance.
Introduction
Materials
